| |
Minimal Kit, initial base for a strictly minimal CMM
setup.
Engineered for repeatable holding in the space for
molded parts, prismatic or complex-shaped as automotive parts or
customized. The system is provided with a
300x210mm
M8 tapped baseplate, with a possible integration with identical
other ones or with the 3-point plane system suitable for manual
setups. Ø12,5 tapped elements spread on a minimum volume and acheive
vertical holding up to the desired sizes. |
|
 |
|
L=90 shafts may be used as clamping element and
as rototraslation adjustable element, suitable for reaching
non-linearized points to baseplate's threaded matrix. The kit is
compatible with all available Alukeep elements included
linear SjS elements,
SjS baseplates and
SjS joints whereas it
may be necessary the setup of more complex structure.
The kit is contained into a versatile suitcase.
Below listed the element composition with respective
codes, descriptions and quantities. |
|
